7 Gun Cleaning Mistakes That Damage Your Firearm
Gunsmiths will tell you: a surprising share of the work they see comes from cleaning mistakes, not shooting. All seven of these are avoidable with basic discipline.
1. Steel brushing a dry bore
A bronze brush used dry, back and forth, is how rifling edges get peened. Brushes are for wet, one-directional work only - and nylon does the job for routine carbon.
2. Reversing the patch mid-bore
Push a patch chamber-to-muzzle, drop it, start fresh. Pulling a fouled patch back over clean steel drags grit across the whole length. This single habit causes most "mystery scratches."
3. Wrong patch size on a jag
Too-small patches expose the brass jag point, which then rides the rifling. If you hear scraping - stop. Size chart here: caliber-to-patch chart.
4. Using WD-40 or motor oil as gun lube
WD-40 is a water displacer; motor oil is made for engine temperatures. Both gum up or burn off. CLP exists because guns need one product doing three jobs at operating conditions.
5. Over-oiling
Oil does not add protection linearly - excess oil collects carbon, dust, and lint, then bakes into paste. Thin film on contact points is the target.
6. Storing guns inside leather or foam-lined cases
Leather holsters and closed foam trap moisture against steel - the classic "gun rusted in the safe" story. Clean, dry, then store with a silicone-treated cloth or in breathable protection. Our silicone gun cloths exist exactly for the storage step.
7. Cleaning rarely but "thoroughly"
A deep clean every six months is worse than a two-minute snake wipe every range day. Carbon hardens, moisture sits, pitting starts. Frequency beats intensity - which is also why we recommend keeping a fast multi-caliber snake kit in the range bag.
Frequently asked questions
Is it possible to clean a gun too often?
Functionally no, but every unnecessary wet pass adds wear time on the bore. Match cleaning intensity to actual fouling.
What is the one habit that prevents most damage?
Patches big enough to cover the jag, one direction only, drop at the muzzle.
Related: Beginner's Guide to Safe First Cleaning | How to Clean a Muzzleloader | How to Clean a Shotgun Barrel
