Custom & OEM Gun Cleaning Tools
We have supplied OEM to more than a dozen global gun-care brands since 1980. ILANSIN is a manufacturer, not a trading company: we own the tooling, we blend the CLP, we cut the patches and we assemble the kits. That is why a private-label brief here is a production decision, not a negotiation with a middleman.
Our strongest capability: machined metal and brushes
Most of what we actually make is metal and brushes — and that is where customisation is easiest. Solid brass jags, bore brushes, rods, tips and adapters are machined and assembled in our own workshop, so a private-label brief on these is a production decision rather than a negotiation with a trading company.
| Component | What we can build to your drawing |
|---|---|
| Solid brass jags | Caliber, thread specification, tip profile, material, surface finish, laser marking, packing format |
| Bore brushes | Bristle material (bronze / nylon / stainless), brush diameter, brush length, thread, handle |
| Rods, tips & adapters | Length, section count, thread, knurl, end fitting, kit configuration |
| Patches, cloths & swabs | Size, thickness, material, pack count, woven label, header card, tube or bag |
We hold a wide caliber range in regular production, which means a custom jag or brush usually starts from an existing tool rather than from scratch — that is what keeps a small first run economical.
A recent small-batch project. An overseas buyer sent us a one-line message asking whether we could make a part to their own specification. It went from that first email to a sample, then to production and shipment, without a single face-to-face meeting. That is the size of project we are happy to take on — you do not need to be a container-level customer to start a custom part with us.
What we can put your brand on
| Product family | Typical customization scope |
|---|---|
| Gun cleaning kits | Case, tools, consumables, insert card and retail carton |
| Patches & wipes | Pack count, patch size, thickness, can or box, label and header card |
| Cloths & mats | Woven label, printed header card, cloth colour, mat dimensions and printed surface |
| CLP oil & lubricant | Bottle size, needle or spray head, label, carton, and formulation adjustment |
| Swabs, jags & brushes | Swab length and tip, jag caliber and thread, brush material, packaging |
| Bore snakes | Caliber set, cord colour, weight, end fitting and poly bag or card |
Scope is confirmed per project. The list above is the range we normally support — not every option applies to every item, and anything that needs new tooling is quoted as such.
How a private-label project runs
| Step | What happens |
|---|---|
| 1. Brief | Target products, target retail price, market and expected volume |
| 2. Specification & artwork | We propose the configuration and issue the artwork template and dieline |
| 3. Pre-production sample | A physical sample made to your specification, quoted per project |
| 4. Approval | Nothing goes to mass production until you have signed off on the sample |
| 5. Mass production | Scheduled against your PO and deposit; batch records kept for liquid products |
| 6. QC & shipment | AQL inspection, carton marking, documentation set, then booking |
MOQ and small-batch runs
Small-batch customisation is welcome. You do not have to commit to a full container to get a part built to your own specification — several of our custom projects began as a modest first run made to one buyer’s drawing.
As a working reference, private-label runs of our standard hardware consumables usually sit in the 500–1,000 pcs band, but that figure is a reference and not a gate: it moves with kit complexity, whether new tooling is required, packaging volume and whether the item contains liquid. Machined brass and brushes in existing sizes sit at the low end. Tell us the part and the quantity you actually need, and we will tell you what is workable.
Artwork, compliance and confidentiality
- Carton and compliance marking. Shipping marks, barcode, country of origin, importer and distributor labelling prepared to your market's requirement.
- Restricted-market labelling. We can produce workable labelling for markets with specific firearms-accessory rules — tell us the destination and we will say what we can and cannot mark.
- Your artwork stays yours. We work under NDA on request, and we do not resell a customer's design, dieline or formulation specification to anyone else.
- Samples are approved before production. The pre-production sample is the reference against which the mass-production run is checked.
Start a private-label brief
Tell us the product, the target retail price and the market. We will come back with a configuration, an MOQ and a sample plan.
Precision machining for your brand
Private label starts with real manufacturing capability: CNC machining of brass jags and tips, hand assembly, and batch-level inspection under your specs.



Send us your drawings on WhatsApp
Private-label projects move faster when we can see what you need. Message us on WhatsApp with your drawing, sample photo or target spec for OEM / ODM gun cleaning supplies — brass jags, brushes, patches, rods, oils and CLP — and we will confirm tooling, MOQ and lead time.
Chat on WhatsApp · +8613750373739WhatsApp is monitored Mon–Sat, 09:00–18:00 (GMT+8); overseas enquiries are answered in English, usually within a few hours. Send drawings, spec sheets or photos and we will come back on feasibility, tooling and lead time.
Note: ILANSIN supplies gun cleaning and maintenance consumables only. We do not manufacture, sell or ship firearms, ammunition or regulated firearm components. Buyers are responsible for compliance with the firearms and import regulations of their own jurisdiction.
