Sample Approval Checklist Before Mass Production
Sample approval is the last cheap moment in a sourcing program. Everything after it costs ten times more to fix. Here is the checklist distributors actually regret skipping.
1. Dimensional check
Measure the sample against your spec sheet: length, diameter, thickness, thread type, caliber marking. For jags and rods, thread compatibility is the most common expensive mistake - verify it physically, not on paper.
2. Material verification
- Brass vs plated steel (a magnet answers this in one second)
- Cotton vs blend - burn test or absorbency comparison
- Cloth weight and weave density
- Plastic parts: flexibility and smell indicate material grade
3. Functional test
Use the product the way your customer will. Run patches through an actual bore. Wash the cloth. Pull the snake 20 times. Most defects show up under real use, not inspection.
4. Packaging and printing
- Barcode scans correctly
- Text has no translation errors
- Carton quantity and inner pack match the PO
- Drop test the packed carton
5. Consistency across samples
Request 3-5 units, not one. Differences between units tell you more about production control than any single sample.
6. Lock it in writing
Approve with the spec attached, including: material, dimensions, color standard (Pantone or reference), packaging format, and the accepted tolerance. This document is what protects you if production drifts. Our process is outlined in From Sample to Mass Production.
Frequently asked questions
How many samples should I request?
At least three, from the actual production line - not hand-made prototypes.
What if mass production differs from the sample?
Your written approval spec is the reference. Without it, disputes are opinion versus opinion.
Should I test to destruction?
For consumables yes - wash until failure, pull until failure. You want to know the real lifespan before your customer finds out.
Related: Private Label: How to Start
